Trane Gas Unit Heaters Installation Manual download pdf (Page 28)

Start-Up

28 GLND-SVX01B-EN

4. The unit should be under the control of the thermostat.

Turn the thermostat to the highest point and determine

that the power venter motor starts and the pilot and

main burners ignite. Turn the thermostat to the lowest

point and determine that the power venter motor shuts

off and pilot and main burners are extinguished.

5. If pilot adjustment is required, remove the pilot

adjustment seal

cap and adjust the pilot screw to

obtain proper flame. Clockwise rotation decreases

pilot flame size. Replace the cap.

6. Turn the thermostat to

the desired position.

7. Refer to “Gas Pressure Adjustments,” p. 30 for more

specifications.

Shut-Down

1. Turn the valve selector knob to the “OFF” position.

2. Turn off the electricity.

3. To relight, follow the instructions in “Start-Up,” p. 27

(preceding section).

See Figure

21, p. 29 for burner component parts/

identification.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 42 43

No comments

Trane Gas Unit Heaters Installation Manual Page 28